Attenuator / damper / attenuator for, among other things, helium hotspot set-ups
 
This damper can be used, among other things, for helium miners or if you want to measure amplifiers with a measuring device.
With helium set-ups, it doesn't always mean a lot helps a lot. Sometimes fine tuning is required for Tx or Rx settings. The adjustable damper can help here. It can be adjusted in 0.5db steps from 0db to approx. 31.5db. For example, amplifiers/signals that are too strong can be gradually attenuated in order to achieve the optimal RSSI values.
 
It is also suitable for varying the HS signals on a splitter so as not to receive the same signal!  The measurement shows an HS + damper with an antenna on the roof and a signal generator in the house as an example. 
 
ATTENTION: Not to be confused with the RSM Converter. The RSM only attenuates signals that are stronger than -55dBm and allows all other signals to pass through, where this attenuator described here removes ALL signals Rx & Tx attenuates depending on the setting.
 
Includes power supply and USB-C cable.
 
Features: Attenuator / damper / attenuator
 
Type:
RF attenuator
Frequency. Range:
DC - 6Ghz
Loss(dB):
1.7 (1-1000Mhz)
Attenuation range:
0~31.5dB (Step 0.5dB)
IP0.1dB:
31dBm at 1GHz
IIP3dB:
50dBm at 1GHz
Return loss:
16dB
Max input power:
23dBm
Impedance:
50Ω
Power supply:
5-15V
 
 
Both connections as SMA Female, Application is indoor